TNM 5000 UNIVERSAL PROGRAMMER SOFTWARE DOWNLOAD

Download TNM 5000 Programmer Software 2021. TNM 5000 Universal Programmer latest firmware download. Télécharger TNM 5000 Programmer Nouvelle mise à jour. TNM 5000 Nand Programmer Specifications. TNM 5000 Programmer Software Update.

Download TNM 5000 Programmer New Update

TNM5000 USB ISP EPROM Programmer Specifications.

• Language: English, Russian, Arabic, Frech, Polski, Turkish, Persian, Chinese,23000 Supported Devices Flash Memory (Parallel / Nand /Serial), EPROM, EEPROM, Serial EEPROM, Microcontroller, NVRAM, FRAM, CPLD, PLD, FPGA). 48-Pins ZIF Socket with Pin Continuity tester & 10-Pins ISP/JTAG Connector. USB 2.0 High Speed, Program 1 Gbit Nand Flash less than 50 sec, Reading Serial Flash memory with 6 Mbit/Sec Speed.
• Auto-detection of all-flash Memories/Microcontrollers with the Device ID. User-friendly software for Windows XP/VISTA/7/8 (32,64 bits). Multiple Programming is possible by attaching 2 or more Programmers to one PC. Very low-cost Main Unit & Low-cost Adaptors. The Heart of TNM5000 is a 500.0000 Gate FPGA with a designed CPU core with a 96MHz Clock for fast programming of chips.
• Special Abilities like,Altera US,B-B.l*a*s.ter Emulation for Quartus Software, Serial Port Emulation, Vehicle ECU, Immoblizer&Dashboard microcontroller Support.TNM5000 Programmer is a very fast, Low cost, High-performance Universal Programmer, specially designed for supporting Flash memories, Nand flashes, Serial EEPROMS, Microcontrollers&Automotive ECU, Dashboard parts. Software: With multiple language support. More languages&Devices can be added by customer request.
• Automotive MCUs: Supporting of ST10F & TMS370 Series by ISP cable for many BOSCH/VALEO/SAGEM ECUs (complete ST10F support of XPROG-m programmer device list). supporting of siemens & Infineon SAK-C167 connected to 44 or 48 pins flash (Siemens/BOSCH/SAGEM S2000 ECU) like HSE FlasHit Programmer. Supporting NEC & Motorola Devices for Dashboards. You Can Download Software&run it in Demo mode to evaluate it.
• PLD/CPLD/FPGA: Supporting All ALTERA JTAG Devices by emulation of USB Blaster Programmer in Quartus Software. Supporting of Xilinx CPLD/FPGA with Jed file. Fast Xilinx FPGA configuration with bit file. Supporting of GAL/PALCE Devices with special option for PALCE unlocking.

TNM5000 Selling Points:

1.very fast because we use USB 2 to connecting to PC
2.PIN detect and detect of ic, for example, in pin detect if one or more pin in chip no connect at ZIF socket TNM5000 will inform you
3. device list is 23000 chip
4. no need for power supply

TNM 5000 Programmer Feature:

1. 23000+ Supported Devices Flash Memory (Parallel / Nand /Serial), EPROM, EEPROM, Serial EEPROM, Microcontroller, NVRAM, FRAM, CPLD, PLD, FPGA).
2. 48-Pins ZIF Socket with Pin Continuity tester & 10-Pins ISP/JTAG Connector.
3. USB 2.0 High Speed, Program 1 Gbit Nand Flash less than 50 sec, Reading Serial Flash memory with 6 Mbit/Sec Speed.
4. Auto-detection of most flash Memories/Microcontrollers with the Device ID.
5. User-friendly software for Windows XP/VISTA/7/8 (32,64 bits). In addition, can support multiple languages (English / Chinese / Arabic / French /FARSI/Russian/Polish……). More languages & Devices can be added by customer request. You Can Download Software & run it in Demo mode to evaluate it.
6. Special Abilities like Altera U S B B l a s t e r Emulation for Quartus Software, Serial Port Emulation, Vehicle ECU, Immobilizer & Dashboard microcontroller Support.
7. TNM5000 Programmer is a very fast, Low cost, High-performance Universal Programmer, specially designed for supporting Flash memories, Nand flashes, Serial EEPROMS, Microcontrollers & Automotive ECU, Dashboard parts.
8. The Heart of TNM5000 is a 500.0000 Gate FPGA with a designed CPU core with a 96MHz Clock for fast programming of chips.