How to fix Starsat x2 4k boot Problem?
Hello, viewers today in this post I’m going to Share With You the Starsat Receiver family, the Starsat SR-X2 boot Problem solution. you can also apply the same method to the starsat SR-x3 boot problem, starsat SR-x4 boot problem, starsat SR-x7 boot problem.
if you did any mistake or upgrade the wrong Software or cut the power during the installation of the Software if Your Receiver is stuck on Boot then how you will recover it, I’m the admin of khan Dish Network and you are reading this post on khan Dish Network, So follow me for the boot problem solution of your Receiver.
First of all Download the below-given software from the link below then formats your USB flash drive with the NTFS system. please use the virus-free USB flash drive, otherwise, the process will disturb. after completing the format Process of your USB flash.
Starsat SR-X2 boot problem solution Step2.
the file that you downloaded from the link below is in format, so you have to unzip the file first with the help of WinRAR software. you will get the RomUpdate folder after extracting the file. Now Cut and paste the folder named RomUpdate in your USB flash drive.
remember, you have to paste that RomUpdate folder into your USB Root folder (without any folder). After pasting the software insert Your USB flash drive to your Starsat SR-X2 Receiver USB port,( if your receiver first USB port not working then insert the USB flash to the other port of your receiver)
Starsat SR-X2 boot problem solution Step 3
Now turn off the Receiver and turn it on again, after turning on the receiver again keep pressing the Power Button on your remote control until you don’t see the Upgrade Option On the Receiver LCD Screen. see in the picture below.#
When you see the Upgrade Option ” Above in the Picture “on the Receiver LCD screen then release the power button, and wait for the Process, after Completing the Process your Receiver will reboot automatically.
after completing the installation process your box may take 4 to 5 minutes time for a reboot, so you have to wait. Now remove your USB flash drive, your Receiver is Now recovered successfully. see in the picture below.
Starsat SR-X2 boot problem software download.