Satellite Receiver Software Download

Montage loader, what is loader and how to use?

Hello, viewers today I’m going to Share With You one of the satellite Receiver manufacturer’s montage Processor Loader tools before I share the loader tool you need to know about the loader tool.

What’s a loader and how to use it?

Sometimes During Software upgrades or downgrades due to wrong Software or any other mistake our Satellite Receiver goes dead or stuck on a red light. So in that case we have two ways to recover our satellite Receiver. We can recover our box with a loader tool, and the second option we have is the Bios flashing Programmer which is available mostly in mechanics.
But in that post, I’ll discuss the loader tool.

Loader tool is a computer Software, which every Satellite Receiver manufacturer is providing to their users for using during any damage or losses. For the Recovery of our Receiver, we need three 3 basic things. (1) Computer. (2) RS232 Cable and (3) Loader tool.
May you know about computer or laptop so I don’t need to discuss further about the computer.

What’s RS232 Cable?

For the injection of software to our Box, we need three main Connections RX, TX, And GND from our Satellite Receiver to Computer or loader. So for that, We need to connect or STB or Satellite Receiver to our Computer or laptop. in that case, we need a specific Cable, which is called Rs232 or db9 cable. You can purchase Rs232 Cable in any local electronic market or from any Satellite dish mechanic Shop, even you can also buy from any online store.

Rs232 Cable for laptop User.

If you have a laptop user and you want to use all that process on the laptop then you need to buy two cables one is the Rs232 to Usb male Cable, and the second one is Rs232 female to female cable. These two cables are not very much expensive. And you can buy very easily from any Electronic market or online store. But be noted we need to inject the Software to any Satellite Receiver through Ch341 or Ch340 IC, so when you buy the Rs232 USB cable, you have to demand from the shopkeeper to give you the Rs232 USB cable with Ch340 or Ch341 Supported IC. Otherwise, Loader will not Work.


Rs232 Cable for PC/Computer Users.

If you have a PC or Computer and you want to use the loader on that. Then you have to need to buy one simple cable RS232 female to Female Cable. And you can do all the process with that Single Cable.


RS232 Mini Cable/Jacket.

For doing all these Processes Our Receiver has must the Rs232 Jacket or Port. So in Now days mostly Receiver are coming without External RS232 Port. In that case, we need to Inject another Mini Rs232 Cable inside our Receiver. You can also take this mini Rs232 cable from any dish Satellite Receiver mechanic shop or you can also remove it from any other old Receiver.

rs232 jacket

loader tool.

When you have arranged all the above things as per your requirement, after that you need to loader tool regarding your satellite Receiver processor. There’s multiple Satellite Receiver manufacturer with different Processor. But in that post, I’m going to share with you the montage loader. You can use the following loader for the following board Boards.

CS6001 DDR2, CS6602 DDR2, VT600 DDR2, CS6001 DDR3, CS6002 DDR3, VT600 DDR3, CS5000 DDR2, CS6000 DDR2, CS6100 DDR2, VT6100 DDR2, CS5000 DDR3, CS6000 DDR3, CS6100 DDR3, VT6100 DDR3, CS5000 1MB, CS5000 2MB, CS2100, VS3001, HM1521-M, TANGO DDR2, TANGO DDR3,
montage loader
montage loader

Montage loader new

Leave A Reply

Your email address will not be published.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More