How to recover sunplus 1506 lv dead receiver with usb
Assalam o alaikum friends :
In this artical i am going to share with you the method for the dead receiver 1506lv Usb recovery with usb flash.
1st option to recover via usb flash :
If during software your receiver goes dead mean on red light or stuck on load position so dont worry you are still have 90% chances to recover through usb flash.
Below i will give a software with the name of ” 1506 lv recovery solution ” download it and unzip the file.
You will got the a file from it with the name of rom.bin copy the rom.bin file in to your usb flash without any folder, be sure your usb is empty and no folder or file etc in it.
After that insert your usb in to your receiver, then turn off the receiver and then turn on again, your receiver upgrading process will be start automatically.
Note : Make sure your receiver costumer id and the rom.bin file costumer id is same.
1506 lv recovery solution software
2nd option with rs232 cable and loader :
If your box is unable to recover with usb flash method which i mentioned above then you can apply the second method of loader;
For that purpose you will need pc ” Computer ” Rs232 cable And the Loader tool Software which i am giving you below.
Connect your receiver with computer through rs232 cable, run the sunplus loader v 1.5.2.04, select your software and run as like you are doing normally other software.
Important thing to note down :
You will need only single rs232 female to female cable for using this loader, if you are using rs232 female to female + rs232 male to usb converter cable it will not work.
Sunplus loader v 1.5.2.04
Receiver 1506lv usb recovery in urdu :
Method no 1 :
Agr aap ka sunplus 1506 lv receiver kisi mistake se software k duran dead ho gia ho mean red light p ho yaa load p ruka hwa ho to aap usy usb flash k zarye recover kr skty hai.
Sb se pehly oper jo ” 1506lv recovery solution software ” k naam se file de gai hai usy download kr k unzip kry.
Unzip krne k bad is file me se rom.bin k naam se ak file nikal ayegi. Usi rom.bin file ko kisi bhi khaali ( empty) usb me bagher kisi folder k copy kry.
Ap k receiver me jo software dead hony se pehly installed tha us software ki costumer id rom.bin waly file ki costumer i’d k saath match krna zarori hai..
File ko usb me copy krne k bad usb ko receiver me lga k receiver off kr k dubara on kry, ap ka receiver recover hona shoro ho jaye ga.
2nd method with loader:
Agr usb se ap ka receiver recover nahi howa to then aap loader ka istimal kr skty hai.
Us keliye aap ko ak computer, ak rs232 cable aur loader tool jo k oper me ne dia hwa hai ki zarort parhegi.
Apne receiver ko rs232 cable se connect kry aur baqi tareqa kaar wahi hai jo baqi sunplus receivers keliye hum use krty hai.
Bs ak baat ka khyal rahy k aap ko sirf ak single rs232 female to female cable use krna hai. agr aap saath me usb converter cable use kr rhy hai to who kaam nhi krega.
Ap ko sunplus loader v 1.5.2.04 oper post me mil jaye ga wahi de download kry.
Apni duaaon me yaad rakhiye ga.